Menu

CCNA 3 Scaling Networks v6.0 ScaN EIGRP Practice Skills Assessment Answers Option 3 | CCNA5.NET





CCNA 3 Scaling Networks v6.0 ScaN EIGRP Practice Skills Assessment Answers Option 3

Central Router

Central>enable
Central#configure terminal
Central(config)#ip route 0.0.0.0 0.0.0.0 s0/1/0
Central(config)#ipv6 unicast-routing
Central(config)#ipv6 route ::/0 s0/1/0
Central(config)#router eigrp 99
Central(config-router)#network 192.168.100.8 0.0.0.3
Central(config-router)#network 192.168.100.20 0.0.0.3
Central(config-router)#eigrp router-id 1.1.1.1
Central(config-router)#exit
Central(config)#ipv6 router eigrp 99
Central(config-rtr)#eigrp router-id 1.1.1.1
Central(config-rtr)#no shutdown
Central(config-rtr)#exit

Central(config)#int s0/0/0
Central(config-if)#ipv6 eigrp 99

Central(config-if)#int s0/0/1
Central(config-if)#ipv6 eigrp 99
Central(config-if)#exit

Central(config)#int s0/1/0
Central(config-if)#ipv6 eigrp 99
Central(config-if)#exit

Central(config)#int s0/0/0
Central(config-if)#bandwidth 2000
Central(config-if)#exit

Central(config)#int s0/0/1
Central(config-if)#bandwidth 2000
Central(config-if)#exit

Central(config)#router eigrp 99
Central(config-router)#redistribute static
Central(config-router)#exit
Central(config)#ipv6 router eigrp 99
Central(config-rtr)#redistribute static
Central(config-rtr)#

============================
East-2 Router:

East-2>enable
East-2#configure terminal
East-2(config)#ip route 0.0.0.0 0.0.0.0 s0/0/0
East-2(config)#int g0/0
East-2(config-if)#standby 1 ip 10.1.0.1
East-2(config-if)#standby version 2

============================
East Router:

East>enable
East#configure terminal
East(config)#router eigrp 99
East(config-router)#network 10.1.0.0 0.0.0.255
East(config-router)#network 192.168.100.8 0.0.0.3
East(config-router)#network 192.168.100.32 0.0.0.3
East(config-router)#eigrp router-id 2.2.2.2
East(config-router)#exit
East(config)#ipv6 unicast-routing
East(config)#ipv6 router eigrp 99
East(config-rtr)#eigrp router-id 2.2.2.2
East(config-rtr)#no shutdown
East(config-rtr)#exit
East(config)#int s0/0/1
East(config-if)#ipv6 eigrp 99
East(config-if)#int s0/0/0
East(config-if)#ipv6 eigrp 99
East(config-if)#int g0/0
East(config-if)#ipv6 eigrp 99
East(config-if)#exit

East(config)#int s0/0/0
East(config-if)#bandwidth 2000
East(config-if)#exit
East(config)#router eigrp 99
East(config-router)#passive-interface g0/0
East(config-router)#exit

East(config)#int g0/0
East(config-if)#standby 1 ip 10.1.0.1
East(config-if)#standby 1 preempt
East(config-if)#standby 1 priority 150
East(config-if)#standby version 2

============================
West Router:

West>enable
West#configure terminal
West(config)#router eigrp 99
West(config-router)#network 10.10.0.0 0.0.0.255
West(config-router)#network 10.15.0.0 0.0.0.255
West(config-router)#network 10.20.0.0 0.0.0.255
West(config-router)#network 192.168.100.20 0.0.0.3
West(config-router)#network 192.168.100.32 0.0.0.3
West(config-router)#eigrp router-id 3.3.3.3
West(config-router)#exit

West(config)#ipv6 unicast-routing
West(config)#ipv6 router eigrp 99
West(config-rtr)#eigrp router-id 3.3.3.3
West(config-rtr)#no shutdown
West(config-rtr)#exit
West(config)#int g0/0.10
West(config-subif)#ipv6 eigrp 99
West(config-subif)#int g0/0.15
West(config-subif)#ipv6 eigrp 99
West(config-subif)#int g0/0.20
West(config-subif)#ipv6 eigrp 99
West(config-subif)#exit

West(configpv6 eigrp)#int s0/0/0
West(config-if)#ipv6 eigrp 99
West(config-if)#int s0/0/1
West(config-if)#ipv6 eigrp 99
West(config-if)#int s0/1/0
West(config-if)#ipv6 eigrp 99
West(config-if)#exit
West(config)#int s0/0/1
West(config-if)#bandwidth 2000
West(config-if)#exit

West(config)#router eigrp 99
West(config-router)#passive-interface g0/0.10
West(config-router)#passive-interface g0/0.15
West(config-router)#passive-interface g0/0.20
West(config-router)#exit
West(config)#int g0/0
West(config-if)#no sh
West(config-if)#

============================
DataCent Switch:

Change VTP domain and VTP Password to match your exam
DataCent>enable
DataCent#configure terminal
DataCent(config)#int range f0/3-4
DataCent(config-if-range)#channel-group 1 mode active
DataCent(config-if-range)#int range f0/5-6
DataCent(config-if-range)#channel-group 2 mode active
DataCent(config-if-range)#exit
DataCent(config)#int g0/1
DataCent(config-if)#no shutdown

DataCent(config-if)#int g0/1
DataCent(config-if)#switchport mode trunk
DataCent(config-if)#switchport trunk native vlan 99
DataCent(config-if)#int g0/1
DataCent(config-if)#switchport nonegotiate

DataCent(config-if)#int range f0/3-4
DataCent(config-if-range)#switchport mode trunk
DataCent(config-if-range)#switchport trunk native vlan 99
DataCent(config-if-range)#int port-channel 1
DataCent(config-if)#switchport mode trunk
DataCent(config-if)#switchport trunk native vlan 99
DataCent(config-if)#switchport nonegotiate

DataCent(config-if)#int range f0/5-6
DataCent(config-if-range)#switchport mode trunk
DataCent(config-if-range)#switchport trunk native vlan 99
DataCent(config-if-range)#int port-channel 2
DataCent(config-if)#switchport mode trunk
DataCent(config-if)#switchport trunk native vlan 99
DataCent(config-if)#switchport nonegotiate
DataCent(config-if)#exit

DataCent(config)#vtp mode server
DataCent(config)#vtp domain TownEd
DataCent(config)#vtp password TWE_123!
DataCent(config)#vtp version 2

DataCent(config)#spanning-tree mode rapid-pvst
DataCent(config)#spanning-tree vlan 10,15,20 priority 24576

============================
Bldg-1 Switch:

Change VTP domain and VTP Password to match your exam

Bldg-1>enable
Bldg-1#configure terminal
Bldg-1(config)#int range f0/3-4
Bldg-1(config-if-range)#channel-group 1 mode active
Bldg-1(config-if-range)#int range f0/1-2
Bldg-1(config-if-range)#channel-group 3 mode active
Bldg-1(config-if-range)#exit

Bldg-1(config)#int range f0/3-4
Bldg-1(config-if-range)#switchport mode trunk
Bldg-1(config-if-range)#switchport trunk native vlan 99
Bldg-1(config-if-range)#int port-channel 1
Bldg-1(config-if)#switchport mode trunk
Bldg-1(config-if)#switchport trunk native vlan 99
Bldg-1(config-if)#switchport nonegotiate
Bldg-1(config-if)#int range f0/1-2
Bldg-1(config-if-range)#switchport mode trunk
Bldg-1(config-if-range)#switchport trunk native vlan 99
Bldg-1(config-if-range)#int port-channel 3
Bldg-1(config-if)#switchport mode trunk
Bldg-1(config-if)#switchport trunk native vlan 99
Bldg-1(config-if)#switchport nonegotiate
Bldg-1(config-if)#exit

Bldg-1(config)#vtp mode client
Bldg-1(config)#vtp domain TownEd
Bldg-1(config)#vtp password TWE_123!
Bldg-1(config)#vtp version 2
Bldg-1(config)#spanning-tree mode rapid-pvst
Bldg-1(config)#int range f0/10-24
Bldg-1(config-if-range)#spanning-tree bpduguard enable
Bldg-1(config-if-range)#spanning-tree portfast

============================
Bldg-2 Switch:

Change VTP domain and VTP Password to match your exam

Bldg-2>
Bldg-2>enable
Bldg-2#configure terminal
Bldg-2(config)#int range f0/5-6
Bldg-2(config-if-range)#channel-group 2 mode active

Bldg-2(config-if-range)#int range f0/1-2
Bldg-2(config-if-range)#channel-group 3 mode active
Bldg-2(config-if-range)#exit
Bldg-2(config-if-range)#
Bldg-2(config)#int range f0/5-6
Bldg-2(config-if-range)#switchport mode trunk
Bldg-2(config-if-range)#switchport trunk native vlan 99

Bldg-2(config-if-range)#int port-channel 2
Bldg-2(config-if)#switchport mode trunk
Bldg-2(config-if)#switchport trunk native vlan 99
Bldg-2(config-if)#switchport nonegotiate
Bldg-2(config-if)#int range f0/1-2
Bldg-2(config-if-range)#switchport mode trunk
Bldg-2(config-if-range)#switchport trunk native vlan 99

Bldg-2(config-if-range)#int port-channel 3
Bldg-2(config-if)#switchport mode trunk
Bldg-2(config-if)#switchport trunk native vlan 99
Bldg-2(config-if)#switchport nonegotiate
Bldg-2(config-if)#exit

Bldg-2(config)#vtp mode client
Bldg-2(config)#vtp domain TownEd
Bldg-2(config)#vtp password TWE_123!

Bldg-2(config)#spanning-tree mode rapid-pvst
Bldg-2(config)#spanning-tree vlan 10,15,20 priority 28672

=========================
On host E2-2, go to the Desktop tab and open the Command Prompt.

– Enter telnet 2001:DB8:E::1
– Authenticate your Telnet session with the password cisco.
– Move to privileged EXEC mode using the password admin.

Test>enable
Test#configure terminal
Test(config)#interface g0/0
Test(config-if)#no shutdown

=========================
Host E2-1:

IP Address: 10.1.0.11
Subnet Mask: 255.255.255.0
Gateway IP address: 10.1.0.1

=========================

Host E-1:

IP Address: 10.1.0.14
Subnet Mask: 255.255.255.0
Gateway IP address: 10.1.0.1


قالب وردپرس

No comments

Leave a Reply

Time limit is exhausted. Please reload CAPTCHA.

Online